Description:
        The three planetary mixer is a set of reactions, mixing, kneading homogenizing into one versatile and efficient products, widely used in battery paste, medicine cream, cosmetic cream, paste food, electronics solder paste and other body kinds of paste, slurry stirred. Three planetary mixer is most characteristic of other ways to overcome it impossible to scrape mixer mixing tank wall defects, to achieve a real sense of no dead stirred and solve double planetary mixer mixing tank wall material adhered on the local temperature is too high or too low, and the effect of the heat transfer efficiency defects. Mixing drum made of stainless steel mixing paddle and materials in contact with all the parts, the food, pharmaceutical mixers international and domestic standards.
This series of three planetary mixer is from the upper beam, the plane seat, square column, lifting mechanism, lifts and straight track, on the barrel, mixing bucket, vacuum pump, buffer tank, transmission, electric control cabinet and operation panel other components
A) mixing bucket: barrel body jacket, inside and outside lamps with 304 # stainless steel, jacketed spoiler, bottom of the barrel jacket, 4 sheave bottom of the barrel, the barrel body with handles. After turning deflector jacket, uniform cooling of the cooling water barrel materials, ensure that the material process temperature uniformity. Barrel liner surface and the flange face by turning to ensure that the tube wall and throwing cage blade close to the inner wall of the barrel scraping adhesive materials are involved in mixing.
2) stir cage: There are three stainless steel stir cage, the cage side stir stir stir plate and the bottom plate has a non-metallic spatula, mixing drum wall and on the bottom of the barrel material for scraping. In the planetary gear system driven by three throwing cage with the carrier for both the revolution, while for each rotation, so that the material is no dead zone barrel stir. Speed according to the temperature sensitivity of mixing materials can be used for frequency control, temperature-sensitive a lower speed, low sensitivity to temperature using high speed, in order to improve mixing efficiency.
3) on the barrel: the barrel is 304 stainless steel, is a component of the seal chamber, on a vacuum line and vacuum gauge, illuminated windows, observation and feeding window.
4) Transmission system: using planetary gear transmission principle, to achieve three throwing cage and carrier revolution, they also make their rotation. Transmission system adopts inverter control revolution and rotation speed.
5) Vacuum system: mixing drum with the barrel between the barrel and frame between the drive shaft and frame are made between the seal design, dynamic seal with mechanical seals, static seals and O-seal with a square pieces. Vacuum pump rotary vane vacuum pump, so that the barrel material in a vacuum environment to achieve mixing, mixing of materials to meet specific process requirements.
6) Lift system: screw jacks, lifts, linear guide components for conveying mixing bucket lift, easy to operate.
7) Control system: stirring speed controlled by frequency conversion; mixing bucket carrier together with a thorough mixing drum rotates and bottom thermocouple device for barrel temperature measurement and control of the material, to overcome the Double Planetary Power Mixer Thermocouple not contacting materials, can only measure the ambient temperature of the mixing bucket defects; mixing bucket positioning, up, down both proximity switch control, and there is a safety interlock logic control, a safe sound and light alarm.